Saturday, December 27, 2014

Dream Job: Front End Specialist





Each one of us has our own dreams in life. Though not so common, but I knew a few who wanted to be a front end specialist Morris County NJ. It is a kind of job that deals and specializes with automobiles.

The job descriptions include:
Ø  Inspecting vehicles for damage and jot down findings for repair references
Ø  Repairing or replacing defective ball joints
Ø  Overhauling and adjusting automobile brake system
Ø  Testing electronic computer components to make sure it is operating properly
Ø   Tuning in automobile engines to ensure maximum safety and  proper and efficient functioning
Ø  Estimating expenses for vehicle repair
Ø  Repairing and adjusting defective fuel injectors and gasoline filters
Ø  Repairing/replacing automotive leaf springs
Ø  Troubleshooting the emissions control system like fuel, start up, etc.
Ø  Fixing the air conditioners and service components
Ø  Replacing faulty mufflers and tailpipes
Ø  Rebuilding and repairing automotive fuel injection units
Ø  Installing and repairing hydraulic or electromagnetic automatic lift mechanisms that is used to raise and lower the automobile windows, seat and etc
Ø  Rebuilding clutch systems
Ø  Changing the spark plugs, fuel and air filters and batteries
Ø  Replacing the engine management systems when necessary
Ø  Replacing hydraulically assisted systems with electric-powered systems
Ø  Servicing internal combustion engine systems for hybrid electric vehicles
Ø  Servicing and repairing butane gas, ethanol, methane, or other alternative or biofuel systems
Ø  Conducting visual inspections of compressed natural gas fuel systems
Ø  Servicing biodiesel fuel tanks for algae or sludge accumulation by cleaning
A front end specialist as well provides services for:
1.      King Pins
it is the main pivot in the steering mechanism of the truck. Mostly in the steering systems, it is the pin forms part of the mechanism that turns the front wheels. If the king pin fails to do its job, steering system will not work properly. So, to avoid accidents arising from turning problems, have your truck's king pin is checked and serviced regularly.

2.      Power Steering
this is also known as the steering assist system. It assist you turn the truck by augmenting the steering effort of the steering wheel. As we know, power steering works by utilizing a hydraulic pump mounted on the engine, so when the wheel steer, the fluid in the steering system is released applying pressure to the steering structure. Make sure that your truck's power steering is regularly serviced for you and family’s safety.


3.      Spring & U Bolts
lastly, spring supports and U bolts. The motion of the spring is controlled by the shocks, as it stops the spring from bouncing, thus making your car or truck to move smoothly over bumps and gives you an even and enjoyable ride .
There are still so many reasons as to why you need your car or truck to be checked regularly. The things I mentioned above are just the common reasons, but if I will be asked why, the very important reason is, my life and my family’s life are very precious. One way of saving our lives is to have our car checked and serviced regularly by a front end specialist Morris County NJ.

Tuesday, November 25, 2014

The Engine on Its Performance

When we talk about cars there are several things we must know and consider like engine cooling system. This system is just one of the most delicate parts of a car which is used to prevent from heating. So there is a need for this system to be maintained and be on the go as always.  But what is really meant by engine cooling system? Engine cooling system is an engine that is used for air and engine combustion. Aside from that, this part also capable for extracting heat flows and cools it down so it maintains the engine in well balance system organization. So with this importance of the system there are many companies that offer good quality engine cooling system like engine cooling system specialist Morris County NJ.

If you choose to have this system specialist on your side you will never regret to have them. They are capable in fixing your engine cooling system in the most reliable system just like as new. They also ensure that the quality you need for the engine is stable and well equip with best system on hand. Aside from that, they think for the customers need and want to meet the customer’s interest. So decide in which services you are going to engage with for you to have the best and quality engine cooling system on your hand. 


Things to consider choosing your engine cooling system

There are so many concerns when we select our cooling system if you are going to replace your old on. Here are some tips you can rely on upon choosing the product. First, take a look the materials of the product. If they are made from high quality specification then you are assured of the unit you tend to buy. Next to be seen is the product manufacturer. Be sure that the product you are buying is authentic to ensure a lifelong guarantee of the system. Then, try to this the engine if it really passed the quality control which gives enough system function. These things can help you to determine the right and appropriate engine on your hand. You will surely not regret at the end.

Benefits of Engine Cooling System Specialist Morris County

Every product made has it own benefit for the people. On this way you will be assured that the product you are buying is well equipped with the materials you needed. These are some benefits you can enjoy for having the specialist on your engine. First, it will keep your engine in will managed and properly fixed just like before. Next, you will love the performance of the engine if it is being handled by the specialist. They are the one who focus on the specific function of the car. Another thing is that I will give you a peace of mind with no worries as you engage to the right specialist on your car.  It is not just a wise decision but a great choice for having the best in your system. It will not just give you your need but the comfort for you and your family as you travel in any places. So think for the best. Decide now!

Wednesday, October 29, 2014

Guide to Emission Repair Facility NJ

Fire produces smoke and smoke (or emission) is generated by the controlled explosions in the engine of the car. The exhaust system of a car is responsible for removing these emissions along with cleaning them as much as possible just before discharging them in the air. Once the car exhaust system fails to do this task, it needs to be replaced with the help of an Emission Repair Facility NJ.

Some of the parts of the exhaust system can be easily repaired with a wrench, but others require some welding equipment. Clamps are useful to cinch down joints among the pieces. Repairing the exhaust emission system requires setting it up on safety stands, stopping the wheels, and then crawling down the vehicle.

The Life of an Emission System

The emission control system gathers exhaust gasses once they leave the cylinders of the engine, and those chemicals are piped to the catalytic converter via the exhaust pipe. Automobiles with all cylinders consist of one exhaust manifold. The exhaust system gets broken or deformed as a result of too much engine heat. In case the exhaust is getting out from places it should not be, then the exhaust manifold may have to be changed. Commonly, the gasket closes the manifold, and the engine block needs to be replaced when fixing the exhaust manifold.

How to Repair the Exhaust Manifold

To start with, find the exhaust manifold of your car, locate the exhaust muffler and pipe underneath the vehicle and then trace it where it connects to the exhaust manifold. Remove the screws that join the exhaust pipes to the exhaust manifold output. You need a long half inch socket wrench driver to unscrew the bolts. After taking them off, the gaskets have to be examined and replaced. Detach the bolts that connect the manifold to the engine block. Carefully, take off the exhaust manifold and gasket from the engine. Then, re-install the exhaust pipe to the manifold output, changing the gasket. Also, when necessary, hire an
Emission Repair Facility NJ.

How to Replace an Exhaust Pipe:

Unscrew and take the bolts that hold the exhaust pipe to the exhaust manifold. Then remove hangers keeping the exhaust pipe under the vehicle, making sure that it will not fall. Now, change the exhaust pipes and connect them again to the system. If you are changing the muffler, catalytic converter or resonator, do so as you are replacing the pipes. This is a task that is worthy of a treat when successfully done.

Keep the Surroundings Clean of Car Emissions

a car typically has 1.625 scads of emissions control units buried in its nooks and crannies. The exhaust gas re-circulation system brings back the exhaust gases to the engine for the re-burning process. The evaporating emissions system recycles fuel gases. The positive crank case ventilation system re-circulates the gases from the oil pan to the intake manifold. These systems must be repaired once they are not working. The Emission Repair Facility NJ ca help you on this as the components of your vehicle need replacement.

Monday, September 29, 2014

Emergency Brake Repair NJ

Brake lines are the ones that are responsible for the flowing of brake fluids from the master cylinder to the tires of the vehicle. Rusting, cracking or corrosion are among the common brake line conditions. Frequent wear and tear, or friction of the brakes to any metal objects, may cause rusting of the brake line. You may decide to change the whole brake line, or only a part of it. Nevertheless, it is recommended to replace it altogether so you do not encounter the same issue time and time again.

Undoubtedly, brakes are one of the most vital parts of a car. A parking brake, also referred to as an emergency brake, helps prevent the car from moving down, once it has been parked in a particular area. It is an extremely important component, and whenever it ceases to function, immediate brake repair NJ is the top priority. There are various situations where an emergency brake would not work. Typically, you will have to take the vehicle to the mechanic to take care of the problem.

Brake fluid leakage, poor braking system and grinding sounds are among the common problems. Besides understanding how to figure out if it needs repair or not, you must also manage to know why it should be repaired. In other words, you identify the source behind the matter.

When Does One Need a Replacement?

An emergency brake in your car is an extra handbrake, or you can say a spare security provided, in case the major brake system of the car encounters a failure. Sometimes, operating the handbrakes may cause rusted cables, which in turn contributes to the replacement of both, the cables and the brakes. These cables are somewhat difficult to work with, but when you start working on them, you will get the basic idea about the job.

How Do You Repair an Emergency Brake?

A suitable installation of the brake cable is important because that is when you will change the buggered wheel nut stud. If you know the location of the cable, get rid of it by locating the cut out, and then line it up with an identical surface. Now, carefully slide the part into its correct place.

Next, use a clip to hold the brake cable in its place. The clip may show up over the fixed cable. Keep it in its proper place by pounding it inside with small rubber hammer. Then, gently pass the brake cable on the hook, and moving the emergency brake lever simultaneously. Use a screwdriver to turn the lever in a clockwise direction, so the cable slips in easily on the mounting hook. When all this process of cable fitting is completed, release the brake lever and allow it to snap back in its place.

Fixing the emergency brake by yourself is a task you must perform only if you are quite familiar about these brakes. If you are a bit uncertain, consider the help of an experienced mechanic to carry out the brake repair NJ for you.

Monday, September 1, 2014

Fix Me and I Start to Cool

Owning a car? Owning a car is a great deal. You can do what you what, you can go anywhere you wanted or even go without hassle waiting for a taxi. Car nowadays is basically one of the essential parts of transportation. There are some people save their money just to buy their dream car. Some others who owns car wanted to customize it. Whatever it may take the most important thing it can give comfort and convenience. Speaking of that, car should be fully equipped with high end materials that you may enjoy for long lasting using. But after a long time using your car, there are times some of the parts malfunction. Have you ever experience that? What if your air condition has already defected? Do you know how to fix it? Let us to talk about car air conditioning repair NJ.

How to fix your car air condition

Fixing things is quite difficult job to do. Aside from it consumes your time, it also need attention and a lot of monetary budget to do. But, there are basic thing you can do on how to troubleshoot your machine. It will not need more money but only your time and effort. Here are the simple ways you can lean on:
  • In weird layout of your car Ac is typically function as generator.
In this sense you can figure out what and where is the problem. It is made to transfer heat from one place to other side of the car. In this very sense you your self can fix it or hire someone to fix it for you.
  • Familiarize with your car's components
In order for you to fix what is the problem you must need to know first each part of the car. Where it is place what is their function as well. Like the following:
A. Compressor
B. Refrigerant
C. Condenser
D. Expansion Valve
E. Evaporator
F. Dryer
  • Know the air conditioning procedure
In every unit there are a procedure used to run the program more convenient using. In car there also process that undertake. It must be note for you to handle it well and if the occurrence of malfunction you know how to do it.
  • Look if R-134a has a leak
To find if there are leaks on your component you must attached a fluorescent dye. Thru this you may fix the problem using the instruction. But if there are enough leaks found it is better to check the value and gauge. Bare in your mind that not to poke your valve for it will create much leaks on your device.
  • Compressor must be turn on.
Start up your car, and then turn on your AC button. It will pump all things off. On the other hand, the blower will be automatically on. If the pulley is not turning it simply means it was not engage so a problem may exist. It might be a broken Ac connection or wiring problem.
  • Check if there are other components that malfunction.
See if there are any problem occurs as Ac turns on like the bad fuses, broken belt, bad switches, and broken wires.
  • Check if the cooling process occurs.
If the system starts to cool already but not too much refrigerant might be to up or look further the instruction in your car kit.

Saturday, July 26, 2014

How to Become an Auto Mechanic

You may see an auto mechanic doing greasy car repair NJ in an auto shop. While you think that they have the dirtiest job on earth, you better think twice. They are actually modern scientists that can quickly repair or diagnose a specific car problem. That is not all; some of them are actually earning a lot more than you do. Plus, they get to do what they really love – so it is not considered a job on their part. Most car lovers go into this profession so they can do their passion and earn money from it.

If you are enthusiastic about vehicles and you want to start a career as an auto mechanic, here are the steps to do:

  • Initiate knowledge
The first thing that you need to do is to equip yourself with the right knowledge on auto services. This is true when you only know the technicalities of your own car. Do the initiative of also finding out the technical information of others. This can be done by means of reading different books about different models and car parts. Today’s technology paved the way for electronic gadget being used to diagnose and repair vehicles. You can search on this information as well.

  • Get formal training
This is the most important step to become an auto mechanic. Obtaining formal training will extensively infuse you with practical knowledge about cars, and actual training on how to handle different vehicles. There are lots of schools that offer programs for auto mechanics. There are also high schools that have technical programs such as the Automotive Youth Education Service (AYES). This car repair NJ program is a partnership between schools and automotive companies. If this is not applicable to you, you can go to schools certified by the National Automotive Technicians Educational Foundations (NATEF).

  • Get certified
After finishing training, you can now apply for certification. Being able to be certified creates good reputation and credibility. This is important if you are establishing a career or business out of it. The National Institute for Automotive Service Excellence (ASE) certification can examine if you are eligible to take the exam. The certification is applied to electrical brakes, steering and suspension, air conditioning, engine repair, manual transmission, automatic transmission, engine performance, and others. If you pass eight of their examinations, you can be called a Master Automobile Technician.

  • Start working
It is now time to apply what you have learned by actually diagnosing a car. You can either get a job or establish a business. This comes with good marketing skills on how you can promote your services. Be sure to also commit to excellent customer service along with efficient services.

On the average, being a good mechanic may take time. It may take about 3 to 5 years before you can call yourself expert in a particular specialty. This should be enough to gain the trust and recommendations from your clients. After some time, you can now apply your passion into something that you can earn money from.

Monday, June 23, 2014

Right Time to have a Tire Sales and Repair

At the turn of the century car manufacturers have started to develop and manufacture vehicles for the masses. Cars used to be an item for the rich, however that has changed as the years goes by specially now where technology reigns. From being a status symbol, owning a vehicle has now became an everyday necessity. To make a person’s life a bit easier on its everyday struggle having a car at hand has become very big help to the persons concerned. Since we now live in a world full of technologies our once laid back lives has made a drastic change. With the advancement of everything around us, our everyday lives has been more chaotic and stress related that we all tend to find things that would make our waking hours as well as our sleeping hours stress free and easier to deal with.

Also gone are the days where our work place is just around the corner. Most people now have to deal with a lot of hassle just to be able to get to work on time. These are all due to the fast track lives we now have now. And because of this owning a car has become a major necessity to get around and about without much aggravation. Hence car manufacturers have been competitive enough that they choose to produce vehicles that everyone can afford. Moreover because of the ever changing climate around us, this has taken some toll on maintaining a car. From the engine down to its tire sales & repair Morris County NJ there is some especial gear that needs to be considered when the season change. During winter a car needs snow tires as well as snow chains to help prevent accidents on the road.

Thus, this is equipment can make a dent on a family’s budget. But additional expense or not these are some disadvantage that comes along in owning a car. The only thing to do to be able to cut cost is go to a reliable store that would give you your money’s worth when it comes to tire sales & repair Morris County NJ. One should know a trusted brand as well a trusted entrepreneur that would advice and help make the right selection for tires that is needed for the season. Having the right tire for the right season is very important not just for the car to properly run but it might also be a factor that might save the life of the inhabitants of this planet. Note that most accidents occur on the road involves vehicles; it does not matter whether the person is in or out the car. Study shows that some of the accidents are caused by poor maintenance of the vehicle. That is why a car should always be properly maintained for the safety of the people in the car as well as for the people who have been in the 360 degrees radius of the vehicle.

A simple negligence on the owner’s part might cause damage not only on properties but also on the life of everybody.

Wednesday, May 28, 2014

ENGINE COOLING SYSTEM SPECIALIST NJ

One of the most important parts of any automobile is the engine cooling system. It ensures that the circulation of the coolant inside the engine can absorb and release heat. It is composed of vital parts that take specific function in the overall performance of the engine.

According to engine cooling system specialist NJ, the radiator is the most important part where the coolant is being cooled and pumped out for circulation to the different parts of the engine. The radiator hoses are rubber hoses through which the coolant flows. The water pump is responsible in pumping out the coolant from the radiator. The thermostat maintains the temperature of the coolant and controls its flow to the other parts of the engine. The cooling fan is an additional cooling mechanism for the engine especially when it is not running. The thermo time switch or fan switch is a temperature sensor that dictates when the cooling fan must start functioning.

According to engine cooling system specialist NJ, all the parts of the cooling system needs to be checked and maintained to ensure efficient functioning otherwise it may result to the overheating of the automobile engine. The radiator must always have enough coolant in it, once the coolant depletes overheating is inevitable. The rubber hose must be replaced periodically that is way before it becomes brittle. The water pump is run by a belt which must also be replaced periodically way before it wears out. The thermostat and the time switch must be functioning well otherwise the radiator and cooling fun won’t function as well.

Although many changes have been made to enhance the motor's engine but still it is not enough to fully convert 100% chemical energy to mechanical energy; 70% of the energy coming from diesel is converted to heat, and this is the sole purpose of the cooling system to maintain the heat being release by the engine to prevent engine overheating. Aside from this, when the vehicle is running in a colder temperature the cooling system helps in maintaining the heat of the engine to sustain the right temperature.

The periodic maintenance check of engine cooling system is best done by an expert like Peace of Mind Automotive where the services of highly trained, experienced, and skilful auto-mechanics and the need equipment and supplies is readily available. Its team of over 60 years of experience in automobile servicing can offer a wide-range of other services, such as the following: Complementary Shuttle Service, 24 Hr Towing Free Up To 5 Miles To Shop, State Inspections/ Reinsertions, Emission Repair Facility, Insurance Photo Center, Factory Maintained Scheduling For All Makes & Models, Computer Diagnostic Equipment, Air Conditioning Diagnostics & Repair, Transmission Electronic Diagnostics & Repair, Used Car Extended Warranty Repairs, Mailings Of Maintained Reminders & Coupon Specials, Fleet Services Complete Brake Service Center, Tune Ups, Cooling System Specialist, Fuel System Diagnostics, Tire Sales & Repair, Welding Mig Tig Arc Steel/Aluminum, Radiator Repair, Electrical Diagnostics & Repair, and Front End Specialist.

Peace of Mind Automotive is located at 709 Lake Shore Drive in Lake Parsippany, NJ just minutes from 287 and 80. It serves a wide area of New Jersey, specifically: Parsippany, Denville, Boonton, Hanover Township, Cedar Knolls, Whippany, East Hanover, Morristown, Randolph, Montville, Pine Brook, Fairfield, and Morris County.

Tuesday, May 6, 2014

How Brakes Work

It is amazing how science and technology works in different machineries. This is true in automobiles and their braking system. The science of pushing down the brake pedal as it slows or stops the car may sound simple but it takes a lot of process to achieve. If you ever wonder how your car’s brake system works, continue reading.

Knowing the Components

To know how your car’s brake system works, it is best to start knowing the components. The moment you push your foot to the pedal, a brake fluid is immediately released. This is done in two ways. The first one is by mechanical advantages and the second is by the hydraulic force multiplication. The mechanical advantage uses leverage while the latter causes a force on tires using friction – as the tires bring about friction to the road. The current designs of cars have brakes on all wheels but the front brake usually is greater than the rear.
  • Leverage and Hydraulics
Your car’s pedal is designed to enhance the force as you step into the brake pedal. The science behind the hydraulic system is quite simple. The force applied will be transmitted by means of incompressible fluid. The hydraulic system works by applying pressure to a piston, forcing the fluid to go out of the pipe. It will then travel to the cylinders at every wheel as the fluid pressure distributes itself thoroughly around the system. Then, the master piston will move the slave pistons further as the brakes are applied.
  • Power-assisted Brake
There are automobiles that power assistance brakes to reduce the effort of pushing the brake pedal. This is done by means of the partial vacuum in the inlet manifold and the air from the outside. Power-assisted brake is achieved by installing a pipe connection to the inlet. As the brake pedal is pushed, the rod will also push the master cylinder piston. As the brake pedal is pressed, the valve is closed allowing the more air from the outside to go in. This will create a pressure that will force the diaphragm to push the master cylinder piston.

The brake system of your car also is dependent on the disk brakes, drum brakes and the hand brake. Each component is important to ensure that your car stops and slows at the right time.

While it is good to know the different ways on how your car’s brake system works, it may be hard to gain thorough understanding of it. The best way to understand how it works is by talking to a car professional. A car professional will help you understand the system of your car by explaining it in simplest terms. One of the best brake repair Morris County NJ is Peace of Mind Auto. They do not just offer maintenance and repair to your car; they also go out of their way to find the best solution to keep your car in perfect shape.